stickchurch7

How to Replace Door Locks The replacement of your door lock can be a tricky task. It is crucial to protect your home from burglars and to replace locks if you have a new housemate or let out your home. The majority of new locks are designed to fit standard door widths. If your door is more thick and wider, you'll need to purchase a “thick door” kit which has longer screws as well as a longer tail piece for the deadbolt. Remove the old lock You'll need to take your old lock from the door before you install the new one. This can be accomplished with some basic tools, but it's important to ensure that you don't damage the door or frame. Using the right tools will save you from costly repairs in the future. Take off the screws that are the trim and handle. This can be accomplished using the help of a screwdriver. After the screws have been removed, you can pry the trim off. You can then remove the screw that binds the handle and trim to the door. After you have removed the screw, you can remove the handle and take out the lock cylinder from the door. One of the most common signs that your lock is failing is when you cannot longer move the key inside. This is because the tumblers are getting worn out and eventually will stop moving upwards or downwards and thereby limiting the lock's ability to function. If this happens, you'll need to bring the lock to a locksmith in order to be reset-keyed. When you're ready for replacing your deadbolt, start by taking off the screws that hold the faceplate in place. If repairmywindowsanddoors.co.uk doesn't include new screws, you can purchase them from the hardware store. If you're installing a mortise lock you must also take out the screws that attach the external rose plate to the door. After removing the screws, remove the plate and dead bolt. Then, look for a pinhole on the interior handle trim. If you spot one, slide a straightened safety pin into it. You could also try a flat screwdriver against a depression or slot. This should loosen the handle and expose screws that can be removed to remove the entire lock case from the door. Fitting the new lock Installing a new lock could be done with ease regardless of whether you need to replace your lock after a break-in, or you simply want to update your door's appearance. It is important to measure your door prior purchasing a lock to ensure that it is suitable. This is particularly important for deadbolts that require a specific size to fit inside the bolt pocket and strikeplate. If you're unsure of how to measure, get help from your local hardware store or locksmith. If you're replacing a mortice, you can use the existing centrerail as a reference to locate the new mortise. Once you've determined the location of the lock, you'll need to drill holes on this centre line that are the same width of the lock. Then, chisel away wood until you have a neat rectangular space for your mortice lock to fit into. Install the lock and then outline the faceplate using the marking blade. Mark and drill holes for screws to secure the faceplate in place. When you are rekeying locks, you can save money by buying a starter kit that includes a set of re-keyable keys and a blank key. These kits can be purchased from many online retailers as well as hardware and home improvement stores. These kits also come with instructions to help you complete your task. Make sure to read your lease agreement if renting prior to changing locks. It could require you to provide the landlord with keys to the new lock. If so, you might be required to remove the old lock and replace it with a standard lock. You can purchase a standard lock from your nearest hardware retailer, or buy a smart lock that connects to the Wi-Fi of your home and lets you lock and unlock your door remotely. A good choice is a Schlage Smart Lock, which is compatible with most door knobs and levers. It can also be connected to your home security hub that is smart which allows you to receive notifications when your door is opened or locked. Installing the new lock A broken lock can be an issue for security, so it is important to replace it as fast as possible. It's simple to replace locks for doors. The first step is to disengage the old lock from the door. This is done by unscrewing the screws that hold it in place and pulling it out. Depending on the type you are using, you might require an Allen wrench or a screwdriver. Once you've removed the old lock, save all of the parts and store them in a safe location. Install the new lock on the door. The majority of kits come with an example of cardboard that shows how the lock will fit on the door. If the template doesn't match up with your door you can trace it using a pencil or use a chisel to take off any extra material. Make sure that the interior latch plate is aligned with the mortise hole after the new lock is installed. When installing the new lock, make sure not to tighten it too much. This can cause the lock to squeak or even break. If you have a lock that is keyed, ensure that the spindle is in alignment with the hole on the knob. If it's not, use the screwdriver to drive the lock into the knob. Install the decorative baseplate that comes with the lock once you've finished installing it. If the lock doesn't have a base plate, you can purchase one that matches your hardware. Test the new lock to confirm that it functions. This can be done by inserting the lock's key and turning the lock to ensure that it opens. If this doesn't work, you need to seek out a locksmith. You can also stop burglaries by having an expert rekey your locks. This process involves changing the internal lock tumblers to ensure that it will not accept your old keys. This will ensure that your home is secure and will give you peace of mind. Testing the new lock Installing a new lock is a great way to ensure that it will work according to the specifications. It's very important to carefully follow the directions. If you don't follow them, you could not be able to open your door. You can ask an expert locksmith for help when you're not sure what to do. A locksmith can give you guidance on the most suitable locks for your house. If you have trouble opening your lock, there might be a problem with the handle or latch. Try lubricating your latch by spraying it with WD-40. In some instances it can fix the issue. You may need to replace it if the latch isn't working correctly. The lock could have been installed incorrectly. The door handle clip is usually damaged or missing from the new lock. In this situation, you should grab the handle from inside and insert a retainer clip. After that, connect the handle to the lock and test the operation of the lock. After you've replaced the lock it's important to check the keypad to make sure it's functioning properly. You can test it by inserting the key in and turning it. If the keypad is working correctly, it will unlock and lock your door. You should also check the deadbolt lock to determine whether it's working properly. If it's not, you should remove the latch and undo the Phillips head screws on the sides of the door in order to unlatch it. Replace the old deadbolt with the new one. Make sure you orient and load the deadbolt lock correctly. Spindle testing is a different method to test a new lock. This can be done by inserting a screwdriver in the spindle. This test should be carried out prior to reinstalling a lock to ensure that there aren't any errors.